Getting Started; Feature; When Using The Remote Control; Battery Replacement - Alpine VPA-B211A Owner's Manual

Getting Started

SOURCE
Operation is carried out from the remote control.

Feature

If the unit is connected to an ALPINE Ai-NET compatible
device (DVD/HDD Player, DVD/CD Changer, Adapter for
iPod, etc.), operation with the supplied remote control can be
carried out. You can also display the screen on the external
monitor. If the unit is connected to an ALPINE navigation
system, you can display navigation screens on the external
monitor. For details on the function of connected devices,
refer to the Owner's Manual.

When Using the Remote Control

• Point the remote control at the remote control eye within
about 2 meters.
• It may not be possible to operate the remote control if the
remote control eye is exposed to direct sunlight.
• The remote control is a small, lightweight precision device.
To avoid damage, short battery life, operational errors and
poor response, observe the following.
- Do not subject the remote control to excessive shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.
• Connect the supplied remote control eye. Failing to do so
will result in a loss of remote control operation.
Refer to "Connections" (page 22).
• If an ALPINE monitor is connected as the external front
monitor, connect the remote control input lead to the
remote control output lead of the monitor. In this case, you
do not need to connect the supplied remote control eye.

Battery Replacement

Applicable battery: Use two "AAA" sized dry batteries or
equivalent.
1
POWER
MUTE
2
3
Opening the battery cover
Slide out the battery cover while firmly pressing in
the direction of the arrow.
Replacing the battery
Insert the batteries, observing the polarities as
illustrated.
Closing the cover
Slide the cover as illustrated until a click is heard.
5
-EN