Installation - Salus ST620RF Instruction Manual

ST620RF Manual Version 005 CMYK:Layout 1

INSTALLATION

Please read the important safety information at the start of this manual before you begin to install the device.
The ideal position to locate the ST620RF programmable thermostat is about 1.5m above floor level. It should be
mounted in a location where the thermostat is accessible, reasonably lit and free from extremes of temperature and
draughts. Do not mount the thermostat on an outside wall, above a radiator or in a location where it may be
subjected to direct sunlight.
The ST620RF should be mounted in a location where it will not come into contact with moisture or condensation,
as this can affect the Touch Ring operation.
To ensure trouble free reception for both the Radio Controlled Clock (RCC) and the Radio Frequency (RF) signal,
always ensure that the programmable thermostat is mounted away from any possible sources of interference (such
as radios, TV sets, computers, etc.), and is not mounted on or in close proximity to large metal objects. Installing
the ST620RF in enclosed areas such as cellars and basements is not recommended.
RECEIVER
COM N/O L N
ST620RF INSTRUCTION MANUAL
BOILER
N
MAINS
FEED
L
Thermostat loop (Remove link)
Live Feed
L N E
L SL
1/9/10 11:56 Page 5
5