Salus ST620RF Instruction Manual page 22

ST620RF Manual Version 005 CMYK:Layout 1 1/9/10 11:56 Page 22
After entering the settings in Programmes 1 to 6 for Monday, the ST620RF display will change to display a COPY TO
screen. On this screen, scroll to the day that you want to copy the settings to using the Touch Ring, and then confirm
this by pressing the OK key. The ST620RF will then move to the next day and ask if you would like to copy again.
In the example here, Monday has been programmed, and the next day that has not been programmed is Tuesday.
Once the settings for Tuesday have been programmed by copying, the settings can then be copied to Wednesday,
and so on.
Pressing the Arrow key at any time will return the ST620RF to the previous screen. Once all the days have been
programmed, the ST620RF will revert to NORMAL mode.
Please be aware that each of the programme time settings must be in sequence: for example, Programme 3 cannot
be set with a time earlier than Programme 2. If this situation occurs, then the ST620RF may operate in an
unpredictable way. The programmable thermostat will return to NORMAL mode after 10 seconds if no Key is pressed
or if no movement is detected on the Touch Ring. In this case, the Programmes will not be updated
22 ST620RF INSTRUCTION MANUAL