HP Kayak XA-s 02xx Troubleshooting Manual page 22

HP Kayak XA-s 02xx PC Workstation - Troubleshooting Your HP Desktop PC Workstation
If Your PC Workstation Has a Software Problem
If You Have a Network Problem
If you have a problem with your PC Workstation's network, run the
HPIEDIAG utility provided on the HP CD-ROM that contains the LAN
drivers, supplied with your PC Workstation. This utility should be run
from a minimal DOS system, without any LAN drivers loaded—achieve
this by booting from a system floppy disk. (If your PC Workstation is
running Windows NT 4.0, you will need to create this system floppy
disk on another PC.)
1 Insert the system floppy disk in the floppy disk drive and re-boot
your PC Workstation.
2 Insert the CD-ROM containing the HPIEDIAG utility in the CD-ROM
drive.
3 Make the CD-ROM drive the current drive by typing, for example,
if D is the letter of your CD-ROM drive.
D:
4 Change to the DIAG directory by typing:
5 Start the HPIEDIAG utility by typing:
the instructions on the screen.
Then check the configuration of the integrated Ethernet interface
using the Setup program. Refer also to the Network Administrator's
Guide preloaded onto your PC Workstation.
22 English
CD\LAN\DIAG
HPIEDIAG
.
. Follow