Technical Specifications; Analog; Digital Inputs - RME Audio M-16 DA User Manual

15. Technical Specifications

15.1 Analog

Line Out, TRS
• Maximum output level: +21 dBu
• Output: 6.3 mm TRS jack, servo-balanced
• Output impedance: 75 Ohm
• Output level switchable +13 dBu, +19 dBu @ 0 dBFS
Line Out, D-Sub
• Maximum output level: +27 dBu
• Output: D-sub 25-pin, electronically balanced
• Output impedance: 150 Ohm
• Output level switchable +13 dBu, +19 dBu, +24 dBu @ 0 dBFS
DA-Conversion
• Resolution: 24 bit
• Signal to Noise ratio (SNR) @ +24 dBu, 44.1 kHz: 115 dB RMS unweighted, 118 dBA
• Signal to Noise ratio (SNR) @ +19 dBu: 115 dB RMS unweighted, 118 dBA
• Signal to Noise ratio (SNR) @ +13 dBu: 115 dB RMS unweighted, 118 dBA
• Frequency response @ 44.1 kHz, -0.5 dB: 5 Hz – 22 kHz
• Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 34 kHz
• Frequency response @ 192 kHz, -1 dB: 5 Hz – 50 kHz
• THD: < - 104 dB, < 0.00063 %
• THD+N: < -100 dB, < 0.001 %
• Channel separation: > 110 dB

15.2 Digital Inputs

ADAT Optical
• 4 x TOSLINK, according to Alesis specification
• Standard: 32 channels 24 bits, up to 48 kHz
• S/MUX: 16 channels 24 bits 96 kHz
• S/MUX4: 8 channels 24 bits 192 kHz
• Bitclock PLL ensures perfect synchronisation even in varispeed operation
• Lock Range: 31.5 kHz – 50 kHz
• Jitter when synced to input signal: < 1 ns
• Jitter suppression: > 30 dB (2.4 kHz)
Word Clock
• BNC, not terminated (10 kOhm)
• Switch for internal termination 75 Ohm
• Automatic Double/Quad Speed detection and internal conversion to Single Speed
• SteadyClock guarantees super low jitter synchronization even in varispeed operation
• Not affected by DC-offsets within the network
• Signal Adaptation Circuit: signal refresh through auto-center and hysteresis
• Overvoltage protection
• Level range: 1.0 Vpp – 5.6 Vpp
• Lock Range: 27 kHz – 200 kHz
• Jitter when synced to input signal: < 1 ns
• Jitter suppression: > 30 dB (2.4 kHz)
User's Guide M-32 DA © RME
30