Technical Specifications; Tco-Ff; Tco-Hdsp - RME Audio TCO HDSP User Manual

4. Technical Specifications

4.1 TCO-FF

LTC/Video In
• LTC In: BNC, unbalanced
• Level range LTC In: -25 dBu up to +12 dBu
• Video In: BNC unbalanced, switchable termination 75 Ohm
• Format: PAL and NTSC
LTC Out
• BNC
• Output level: +4 dBu, via jumper –7 dBu
• Output impedance: 220 Ohm
• Power supply via ribbon cable, 5 V DC, 100 mA
• Dimensions (WxD): 100 x 75 mm

4.2 TCO-HDSP

LTC In
• BNC, unbalanced
• Level range: -25 dBu up to +12 dBu
Video In (Word Clock In)
• BNC, switchable termination 75 Ohm
• Format: PAL and NTSC
Word Clock In (Video In)
• BNC, switchable termination 75 Ohm
• Transformer coupled, galvanically isolated input
• Not affected by DC-offsets within the network
• Signal Adaptation Circuit: signal refresh through auto-center and hysteresis
• Overvoltage protection
• Level range: 1.0 Vpp – 5.6 Vpp
• Lock Range: 28 kHz – 200 kHz
• Jitter when synced to input signal: < 1 ns
• Jitter suppression: > 30 dB (2.4 kHz)
LTC Out
• BNC
• Output level: +4 dBu, via jumper –7 dBu
• Output impedance: 220 Ohm
Word Clock Out
• BNC
• Max. output voltage: 5 Vpp
• Output voltage @ 75 Ohm termination: 4.0 Vpp
• Output impedance: 10 Ohm
• Frequency range: 28 kHz – 52 kHz
• Power supply via ribbon cable, 5 V DC, 100 mA
• Standard bracket, dimensions PCB (WxD): 98 x 75 mm
Bedienungsanleitung TCO
4