RME Audio M-16 DA User Manual page 8

The rear panel of the M-32 DA has 32 analog inputs, mains power, MIDI I/O, word clock I/O,
MADI I/O and ADAT I/O.
ANALOG OUTPUTS: 32 balanced line outputs via 1/4" TRS jacks and four 25-pin D-sub con-
nectors.
WORD IN (BNC): A push switch allows for an internal termination to be activated (75 Ohms).
WORD OUT (BNC): Standard word clock output.
ADAT OUTPUTS 1 to 4 (TOSLINK): Standard ADAT optical ports.
MADI I/O optical: Standard MADI ports.
MADI I/O coaxial (BNC): Standard MADI ports.
MIDI I/O (5-pin DIN): MIDI input and output via 5-pin DIN jacks. Used to remote control the M-
32 DA, and to transmit MIDI data via MADI.
IEC receptacle for power connection. The specially developed, internal hi-performance switch
mode power supply lets the M-series operate in the range of 100V to 240V AC. It is short-
circuit-proof, has an integrated line-filter, is fully regulated against voltage fluctuations, and sup-
presses mains interference.
User's Guide M-32 DA © RME
8