Digital Outputs; Digital - RME Audio M-16 DA User Manual

MADI
• Coaxial via BNC, 75 Ohm, according to AES10-1991
• High-sensitivity input stage (< 0.2 Vpp)
• Optical via FDDI duplex SC connector
• 62.5/125 and 50/125 compatible
• Accepts 56 channel and 64 channel mode, and 96k frame
• Single Wire: up to 64 channels 24 bit 48 kHz
• Double Wire / 96k frame: up to 32 channels 24 bit 96 kHz
• Quad Wire: up to 16 channels 24 bit 192 kHz
• Lock range: 28 kHz – 54 kHz
• Jitter when synced to input signal: < 1 ns
• Jitter suppression: > 30 dB (2.4 kHz)

15.3 Digital Outputs

MADI
• Coaxial via BNC, 75 Ohm, according to AES10-1991
• Output voltage 600 mVpp
• Cable length coaxial: up to 100 m
• Optical via FDDI duplex SC connector
• 62.5/125 and 50/125 compatible
• Cable length optical up to 2.000 m
• Generates 56 channel and 64 channel mode, and 96k frame
• Single Wire: up to 64 channels 24 bit 48 kHz
• Double Wire / 96k frame: up to 32 channels 24 bit 96 kHz
• Quad Wire: up to 16 channels 24 bit 192 kHz
Word Clock
• BNC
• Max. output voltage: 5 Vpp
• Output voltage @ 75 Ohm: 4.0 Vpp
• Impedance: 10 Ohm
• Frequency range: 27 kHz – 200 kHz

15.4 Digital

• Clocks: Internal, ADAT In, MADI In, Word Clock In
• Low Jitter Design: < 1 ns in PLL mode, all inputs
• Internal clock: 800 ps Jitter, Random Spread Spectrum
• Jitter suppression of external clocks: > 30 dB (2.4 kHz)
• Effective clock jitter influence on DA-conversion: near zero
• PLL ensures zero dropout, even at more than 100 ns jitter
• Supported sample rates: 28 kHz up to 200 kHz
User's Guide M-32 DA © RME
31