RME Audio M-16 DA User Manual page 20

Via MIDI remote control, all front panel
controls of the M-32 DA can be locked
(Lock Keys). An exception is the key LOCK
KEYS. Therefore a locking of all the
controls can be revoked directly at the unit
at any time.
Since firmware 2.1 the fan of the M-32 DA
can be set. Additonally
temperature of the M-16 and M-32 is
displayed.
The software MIDI Remote also controls
RME's ADI-648,
Micstasy, ADI-8 QS and the MADI Bridge.
The following functions can only be set via
MIDI Remote:
- Setting of Word Clock Out as Follow Clock
or Always Single Speed
- Changing the Device ID
- Fan control
Fan Modes
Cool
In Cool mode the fan runs all time with
speed 3. From 48°C up it changes to speed
5 (max.), below 45°C it switches back to
speed 3.
Normal
Factory default
Silent
In Silent mode the fan starts not before
48°C and with highest speed. Below 45°C
the fan is switched off again.
20
the internal
ADI-6432, ADI-642,
User's Guide M-32 DA © RME