Panasonic Viera U50A series Operating Instructions Manual page 54

Network connections
To use only DLNA features, you can operate the features without broadband network environment.
● Set up and connect any equipment required for the network environment. You cannot make settings for the
equipment on this TV. Read the manual of the equipment.
●
Required speed (effective): at least 1.5 Mbps for SD and 6 Mbps for HD picture quality, respectively. If the transfer
speed is not enough, contents may not be played back properly.
Example 1
Wired connection
Wireless connection
Wireless LAN Adaptor
"Optional accessories" (p. 6)
● Connect to the USB port.
●
Ensure to use a LAN straight cable for this connection.
●
Ensure that the broadband routers and hubs are compatible with 10BASE-T / 100BASE-TX.
● If you use the equipment compatible only with 100BASE-TX, category 5 LAN cables are required.
Example 2
You can connect the TV and the equipment directly to use DLNA features.
●
Ensure to use a LAN cross cable for this connection.
Note
●
You cannot make settings for the network equipment on this TV. You may be required to make settings on your
computer.
Network Setup
●
Ensure the connections are completed before starting Network Setup.
"Network connections" (see above)
Display the menu and select [Setup]
1
MENU
Select [Network Setup]
2
Setup Menu
Network Setup
54
LAN cable (Unshielded)
LAN cable (Unshielded)
Main Menu
Picture
Sound
Setup
Access
Hub or Router
Access
point
select
access
select
access
DLNA Certified
media server
(for example, PC, etc.)
DLNA Certified
media server
(for example, PC, etc.)