Panasonic Viera U50A series Operating Instructions Manual page 10

Indicator / Control panel
5 6 7
1
Function select
●
[Volume] / [Contrast] / [Brightness] / [Colour] /
[Sharpness] / [Tint] (NTSC signal) / [Bass] ∗ /
[Treble] ∗ / [Balance] / [Digital TV Auto Tuning] /
[Analogue TV Auto Tuning]
∗ [Music] or [Speech] mode in the Sound Menu
2 Channel Up / Down, Value change (when using the
F button), Switching the TV on
3 Changes the input mode
4 Mains power On / Off switch
● Use to switch the mains power.
If you turned the TV off during Standby mode
by the remote control last time, the TV will be
in Standby mode when you turn the TV on with
Mains power On / Off switch.
● When pressing the control panel button (1 - 4), the
control panel guide appears on the left side of the
screen for 3 seconds to highlight the pressed button.
10
1
2
3
4
5
Side of the TV
5
Remote control signal receiver
Do not place any objects between the TV remote
control signal receiver and remote control.
6 C.A.T.S. (Contrast Automatic Tracking System)
sensor
●
Senses brightness to adjust picture quality when
[Eco Mode] in the Picture Menu is set to [On].
7 Power LED
Red: Standby
Green: On
●
The LED blinks when the TV receives a command
from the remote control.
6 7
(p. 31)
1
2
3
4
Rear side of the TV