Displaying Pc Screen On Tv - Panasonic Viera U50A series Operating Instructions Manual

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
●
To connect PC (p. 69, 71)
Select the external input and select [PC]
1
AV
PC menu setting
● To make settings "How to Use Menu Functions" (p. 30)
Menu
R-Gain, G-Gain, B-Gain
R-Cutoff, G-Cutoff,
B-Cutoff
Reset White Balance
Gamma
Reset Gamma
Input Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
Reset PC Settings
H-pos
V-pos
Reset DVI Position
Settings
● Other items (p. 31 - 36)
Note
●
For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2) by using HDMI cable (p. 77).
44
Input Selection
AV1
AV2
PC
HDMI1
HDMI2
TV
SD Card/USB
Item
Adjusts the white balance of bright red / green / blue area
Adjusts the white balance of dark red / green / blue area
Press the OK button to reset to the default White Balance
Switches the gamma curve [S Curve] / [1.8] / [2.0] / [2.2] / [2.4] / [2.6]
● Please note the numerical values are reference for the adjustment.
Press the OK button to reset to the default Gamma
Switches to a wide view:
VGA (640 × 480 pixels) / WVGA (852 × 480 pixels) / XGA
(1,024 × 768 pixels) / WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
●
Options change depending on signals
Set to the minimum level if noise occurs
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
●
Adjust after Clock adjustment
● Set to the minimum level if noise occurs
PC sync signal type [H & V] / [SOG]
[H & V]: by the horizontal and vertical signals from your PC
[SOG]: Sync on Green sync from your PC
Press the OK button to reset [PC Setup] to the default settings
Adjusts horizontal position settings of DVI
Adjusts vertical position settings of DVI
Press the OK button to reset [DVI Position Settings] to the default
settings
select
access
●
Corresponding signals
●
If [H-freq.] or [V-freq.] is shown in red, the signals may not be
supported.
Adjustments / Configurations (alternatives)
(p. 79)