Start-Up Checklist - Bryant 580F DuraPac Series Installation, Start-Up And Service Instructions Manual

I. PRELIMINARY INFORMATION:
MODEL NO.: _______________________________________
DATE: _____________________________________________
II. PRE-START-UP (insert checkmark in box as each item is completed)
VERIFY THAT ALL PACKING MATERIALS HAVE BEEN REMOVED FROM UNIT
VERIFY THAT CONDENSATE CONNECTION IS INSTALLED PER INSTALLATION INSTRUCTIONS
VERIFY THAT FLUE HOOD IS INSTALLED
CHECK ALL ELECTRICAL CONNECTIONS AND TERMINALS FOR TIGHTNESS
CHECK TO ENSURE NO WIRES ARE TOUCHING REFRIGERANT TUBING OR SHARP EDGES
CHECK GAS PIPING FOR LEAKS
CHECK THAT RETURN-AIR FILTER IS CLEAN AND IN PLACE
VERIFY THAT UNIT INSTALLATION IS LEVEL
CHECK FAN WHEEL AND PROPELLER FOR LOCATION IN HOUSING/ORIFICE AND SETSCREW TIGHTNESS
VERIFY PULLEY ALIGNMENT AND BELT TENSION ARE CORRECT
III. START-UP:
ELECTRICAL
SUPPLY VOLTAGE L1-L2
COMPRESSOR AMPS L1
INDOOR-FAN AMP L1
TEMPERATURES
OUTDOOR-AIR TEMPERATURE _____________
RETURN-AIR TEMPERATURE
COOLING SUPPLY AIR
GAS HEAT SUPPLY AIR
PRESSURES
GAS INLET PRESSURE
GAS MANIFOLD PRESSURE
REFRIGERANT SUCTION
REFRIGERANT DISCHARGE
VERIFY REFRIGERANT CHARGE USING CHARGING TABLES
VERIFY THAT 3-PHASE SCROLL COMPRESSOR IS ROTATING IN CORRECT DIRECTION
(580F072 AND 073 ONLY)
Copyright 2004 Bryant Heating & Cooling Systems

START-UP CHECKLIST

(Remove and Use in Job File)
SERIAL NO.:______________________________________________
TECHNICIAN: ____________________________________________
BUILDING LOCATION: ___________________________________
____________ L2-L3 ____________
____________ L2 ____________
____________ L2 ____________
DB _____________
_____________ DB _____________
_____________ DB _____________
_____________ DB
____________ IN. WG
____________ IN. WG (LOW FIRE)
____________ PSIG
____________ PSIG
L3-L1 ____________
L3 ____________
L3 ____________
WB ____________
WB ____________
WB ____________
____________ IN. WG (HI FIRE)
____________ TEMP ° F
____________ TEMP ° F
CL-1
CATALOG NO. 5358-023