Paper Size; Tray Use In Copy Mode - Brother MFC-8480DN User Manual

Paper Size

You can use ten sizes of paper for printing
copies: Letter, Legal, Executive, A5, A5 L,
A6, B5, B6, Folio and A4 and four sizes for
printing faxes: A4, Letter, Legal or
Folio (8.5"×13").
When you change the size of paper in the
tray, you will also need to change the setting
for paper size at the same time so your
machine can fit the document or an incoming
fax on the page.
a
Do one of the following:
To set the paper size for the
MP Tray press Menu, 1, 2, 2, 1.
To set the paper size for Tray#1
press Menu, 1, 2, 2, 2.
To set the paper size for Tray#2
press Menu, 1, 2, 2, 3 if you installed
the optional tray.
1
Tray#2 Only or T2 appears only if the
optional tray is installed.
22.Paper Size
1.MP Tray
Letter
a
b Legal
Select ab or OK
b
Press a or b to choose , Letter,
Legal, Executive, A5, A5 L, A6, B5,
B6, Folio, A4 or Any.
Press OK.
c
Press Stop/Exit.
Note
3
• Any size appears only when you choose
the MP tray.
• If you choose Any for the MP Tray Paper
Size: You must choose MP Only for the
Tray Use setting. You cannot use the Any
Paper Size selection for the MP tray when
making N in 1 copies. You must choose
one of the other available Paper Size
selections for the MP tray.
• A5 L and A6 size are not available for the
optional Tray #2.
• If you chose Transparency for the
Paper Type you will only be able to
choose Letter, Legal, Folio or A4
size paper in step b.

Tray Use in copy mode

1
You can change the priority tray that the
machine will use for printing copies.
When you choose Tray#1 Only, MP Only
or Tray#2 Only
paper only from that tray. If the selected tray
is out of paper, No Paper will appear on the
LCD. Insert the paper in the empty tray.
To change the tray setting follow the
instructions below:
a
Press Menu, 1, 6, 1.
16.Tray Use
1.Copy
MP>T1
a
T1>MP
b
Select ab or OK
b
Press a or b to choose Tray#1 Only,
Tray#2 Only
MP>T1>T2
Press OK.
1
Tray#2 Only or T2 appears only if the
optional tray is installed.
c
Press Stop/Exit.
General Setup
1
, the machine pulls the
1
, MP Only,
1 1
or T1>T2
>MP.
3
3
23