Tray Use In Print Mode; Volume Settings; Ring Volume; Beeper Volume - Brother MFC-8480DN User Manual

Tray Use in print mode

You can change the default tray the machine
will use for printing from your computer.
a
Press Menu, 1, 6, 3.
16.Tray Use
3.Print
MP>T1
a
b T1>MP
Select ab or OK
b
Press a or b to choose Tray#1 Only,
1
, MP Only,
Tray#2 Only
1
or T1>T2
MP>T1>T2
Press OK.
1
Tray#2 Only or T2 appears only if the
optional tray is installed.
c
Press Stop/Exit.
Note
• The setting in the printer driver will take
priority over the setting made on the
control panel.
• If the control panel is set to
Tray#1 Only, MP Only or
1
and you choose
Tray#2 Only
Auto Select in the printer driver, the
machine pulls the paper from that tray.
1
Tray#2 Only appears only if the optional tray is
installed.
3
1
>MP.

Volume settings

Ring volume

You can choose a ring volume level from a
range of settings, from High to Off.
While in Fax mode press
the volume level. The LCD will show the
current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.
You can also change the ring volume through
the menu:
a
Press Menu, 1, 3, 1.
13.Volume
1.Ring
a Med
High
b
Select ab or OK
b
Press a or b to choose Off, Low, Med or
High.
Press OK.
c
Press Stop/Exit.

Beeper volume

When the beeper is on, the machine will beep
when you press a key, make a mistake, or
after you send or receive a fax. You can
choose a range of volume levels, from High
to Off.
a
Press Menu, 1, 3, 2.
13.Volume
2.Beeper
Med
a
b High
Select ab or OK
b
Press a or b to choose Off, Low, Med or
High.
Press OK.
c
Press Stop/Exit.
General Setup
3
3
or to adjust
3
3
25