Change The Paper Size And Paper Type; Change The Check Paper Size Setting - Brother MFC-J5830DW User Manual

Change the Paper Size
and Paper Type
Set the Paper Size and Paper Type settings
for the paper tray.
• To get the best print quality, set the
machine for the type of paper you are
using.
• When you change the size of the paper
you load in the tray, you must change the
Paper Size setting on the LCD at the same
time.
1
Press [Settings] > [Tray
Setting].
2
Press the tray option you want.
3
Press [Paper Type].
4
Press the paper type option you want.
Use plain paper only in Tray #2.
(MFC-J5930DW)
5
Press [Paper Size].
6
Swipe up or down or press a or b to
display the paper size options, and then
press the option you want.
7
Press .
The machine ejects paper with the printed
surface face up onto the paper tray at the
front of the machine. When you use
glossy paper, remove each sheet at once
to prevent smudging or paper jams.
Related Information
• Error and Maintenance Messages on
page 40
Change the Check
Paper Size Setting
If the Check Paper setting is set to [On] and
you pull the paper tray out of the machine or
load paper in the MP Tray, the LCD displays a
message asking if you want to change the
Paper Size and Paper Type settings.
The default setting is [On].
1
Press [Settings] > [All
Settings] > [General Setup] >
[Tray Setting] > [Check Paper].
2
Press [On] or [Off].
3
Press .
Related Information
• Error and Maintenance Messages on
page 40
17