Brother MFC-8480DN User Manual page 185

f
Take out the drum unit and toner
cartridge assembly. Leave the toner
cartridge installed in the drum unit.
g
Put the drum unit and toner cartridge
assembly into a plastic bag and seal the
bag.
h
Close the front cover.
i
Put the styrofoam piece marked
"FRONT" into the original carton (1).
Pack the drum unit and toner cartridge
assembly (2) and put it in as shown
below (3). Wrap the machine in the
plastic bag and put it in the original
carton (4). Put the printed material
behind the machine (5).
Troubleshooting and routine maintenance
j
Put the two styrofoam pieces into the
carton matching the front of the machine
to the "FRONT" mark on one of the
styrofoam pieces, and the back of the
machine to the "REAR" mark on the
other styrofoam pieces (6). Put the AC
power cord and printed materials in the
original carton as shown below (7).
Note
If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts, including the drum unit and toner
cartridge assembly, and printed materials
to use with your 'Exchange' machine.
k
Close the carton and tape it shut.
C
169