Scanning (For Fax-2940); Scanning A Document Using The Ica Driver (Mac Os X 10.6.X - 10.7.X) - Brother FAX-2940 Software User's Manual

7

Scanning (For FAX-2940)

Note
Mac OS X 10.5.8 does not support the scan function. Mac OS X 10.6.x - 10.7.x users can use the ICA
driver for scanning.
Scanning a document using the ICA driver
(Mac OS X 10.6.x - 10.7.x)
You can scan a document using the ICA driver. If you installed available drivers and software from the
download page for your machine in the Brother Solutions Center (http://solutions.brother.com/), the ICA
driver has been already installed to your Macintosh. If you don't see your machine in the Print & Fax or
Print & Scan list, you can add your machine by clicking the + button. You can also scan directly using the
Image Capture application (See Choosing your machine from Print & Fax or Print & Scan uu page 75).
Note
The screens in this section are from Mac OS X 10.6.x. The screens on your Macintosh will vary depending
on your operating system version.
a
Connect your Brother machine to the Macintosh using a USB cable.
b
Launch Image Capture.
c
Select the machine from the DEVICES area on the left side of the screen.
Note
(For Mac OS X 10.7.x)
If you cannot see the machine in the DEVICES area, point the mouse pointer over the area, and then click
Show.
7
7
7
73