Sending A Fax Scanning Adjustment; Sending Operation - Brother FAX-717 User Manual

2
Sending a Fax
Scanning Adjustment
Contrast
If your document is very light or very dark, you might want to set the contrast accordingly. Use
LIGHT to send a light document. Use DARK to send a dark document. After sending the document
the contrast setting is set to AUTO (suitable for most documents) automatically.
1
Insert the document face down in the Automatic Document Feeder.
2
Press Menu/Set, 3, 3.
3
Use or
4
When the screen displays your selection, press
Menu/Set. The screen displays:
5
Press 2 if you
have
Step 6—OR––Press 1 if you want to select additional
settings. The display returns to SETUP SEND menu.
6
Enter a fax number and press Fax Start to send a fax.
Resolution
When you have a document in the feeder, you can use the Resolution key. Press Resolution
continuously until you see your selection on the screen.
see Multiple Resolution Transmission, page 43.
page,
STANDARD: suitable for most typed documents.
FINE: good for small print; transmits a little slower than standard resolution.
S. FINE: good for small print or artwork; transmits slower than fine resolution.
PHOTO: use when document has varying shades of grey; slow transmission time.

Sending Operation

Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending the
fax.
1
Insert the document face down in the Automatic Document Feeder.
2
Pick up the handset and listen for a dial tone—OR—Press Speaker Phone (for FAX-737MC
only).
3
Enter the fax number you want to call. (See Dialling a Number, page 21.)
4
When you hear the fax tone, press Fax Start. If you are using the handset, hang up.
20
Chapter 2
to select AUTO, LIGHT, or DARK.
finished choosing settings, and go to
ACCEPTED
NEXT
1.YES≈2.NO
If you want to set a different resolution for each