Grease Application - Canon BJC-1000 Service Manual

Part 5: Maintenance

2. GREASE APPLICATION

Use the special tool to apply grease at the points and amounts shown below.
Idler Roller Shaft Section:
About a half-grain of rice (MOLYKOTE
Rubbing Section of Feed Roller Shaft and Coil Spring:
To a degree of greasiness (MOLYKOTE PG-641)
Belt Holder:
About 20mg (MOLYKOTE PG-641)
Rear Sides of Carriage Guide Frame:
About 35 to 65 mg (MOLYKOTE PG-641)
PG-641)
Rubbing Section of Carriage and Carriage Shaft:
About 100 mg (MOLYKOTE PG-641)
Figure 5-1 Grease Application Points
5-2
Rubbing Section of Carriage
Hook and Carriage:
About 9 to 18 mg (MOLYKOTE PG-641)
BJC-1000