Setup Procedure; Connecting The Interface Cable; Turning On The Printer - Canon BJC-1000 Service Manual
Hide thumbs
Also See for BJC-1000:
- Setup instructions (4 pages) ,
- User manual (112 pages) ,
- Specification (2 pages)
Table of Contents
Advertisement
BJC-1000
1.3 Setup Procedure
Set up the printer as follows.
1.3.1 Connecting the interface cable
1) Make sure that the printer's power cord is disconnected and the computer's power
is turned off.
2) Connect one end of the parallel interface cable to the parallel interface connector
on the back of the printer.
After connecting the cable, fasten the locking arms to secure it.
3) Connect the other end of the interface cable to the parallel interface connector on
the computer.
1.3.2 Turning on the printer
The printer turns on when the AC plug is plugged in.
Before turning on the printer, first turn on the computer and any other peripheral
equipment. When turned on, the printer executes initializing operations. Finally, the
carriage stops at the cartridge replacement position.
1
Figure 3-3 Connecting the Interface Cable
Part 3: Operating Instructions
3-3
2
Advertisement
Table of Contents
