Paper Settings; Banner Printing - Canon BJC-1000 Service Manual

BJC-1000

1.5 Paper Settings

For optimum printing, the printer has various paper settings to suit various types of
paper. Set the thickness lever before loading the paper.
Media
Plain paper
Bubble jet paper
Envelopes
Transparencies
Back Print Film
Glossy Photo paper
High gloss film
High resolution paper
T-shirt transfers
Fabric Sheet
Banner paper

1.6 Banner Printing

When printing on banner paper, set the paper support and set the paper delivery flap to
the upright position. To avoid misfeeding, put a light crease between the first and
second page and set the first page in the sheet feeder. Place the rest of the banner
paper behind the printer. Each top margin for banner printing is set at 0mm.
However, to avoid printing on the platen, printing will start 3mm from the initial top
margin. Set an extra sheet at the end in case the bottom edge is not printed on the last
page.
Banner printing uses a large amount of ink. To avoid ink shortage, use of a new ink
cartridge when printing banners is recommended.
Banner Paper
TABLE 3-1 QUICK REFERENCE FOR SETTING
Thickness Lever
Left
Left
Right
Left
Left
Left
Left
Left
Left
Right
Left
Figure 3-9 Banner Printing
Part 3: Operating Instructions
Flap Position
Flat
Flat
Flat
Flat
Flat
Upright
Flat
Upright
Flat
Flat
Upright
3-7
Max. stacking height
5 mm (LGL:pages)
5 mm
5
20 pages
10 pages
1 page
1 page
5 mm
1 page
1 page
1 page