Remove The Server Blade; Access The Internal Server Components; Remove Server B Assembly - HP BL2x220c - ProLiant - G5 Server A User Manual

After initiating a virtual power down command, be sure that both server A and server B are in standby
mode by observing that the system power LEDs are amber.

Remove the server blade

To remove the component:
Identify the proper server blade.
1.
Power down the server blade (on page 13).
2.
Remove the server blade.
3.
Place the server blade on a flat, level work surface.
4.
WARNING:
internal system components to cool before touching them.
CAUTION:
before beginning any installation procedure. Improper grounding can cause ESD.

Access the internal server components

To access internal server components, remove server B assembly from server A assembly.
WARNING:
internal system components to cool before touching them.
CAUTION:
before beginning any installation procedure. Improper grounding can cause ESD.

Remove server B assembly

For access component identification, see "Access components (on page 11)."
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server blade
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server blade
Operations 14