Bosch WVT 52458 Operating & Installation Instructions Manual page 27

Operating Instructions
Signal
The acoustic signal indicates:
_
that the additional functions (buttons )have been switched
on or off,
_
Individual programme statuses(e.g. Start of programme,
end of programme), operating errors and faults.
Signal for switching buttons on and off
Press the button and set the programme selector to co-
ttons/coloureds cold. Hold down the
gnal is emitted. The selected setting is stored.
When the additional functions are switched on, a long sig-
i
nal is emitted; when the additional function is switched off,
the signal is short. The volume of the signal cannot be
changed.
Signal for programme status
The signal can be switched on and off ans the volume set
before the start or after the end of the programme.
Press the button and hold down until the signal is emitt-
ed and the volume of the signal changes.
Release the button when the required volume is reached.
The selected setting is stored.
25
button until the si-