Table of Contents Information concerning waste disposal ..Operating Disposal of packaging ....Disposing of your old appliance .
Page 3
End of programme ......Cleaning and servicing the washer dryer ..Housing and fascia .
Page 4
With the purchase of your new Bosch washer dryer you have decided on a modern, high quality domestic appliance. This new washer dryer is the outcome of years of re search. The leading edge design and the quality of the production processes used to manufacture this product ensure it will give you many years of excellent service.
Information concerning waste disposal Your new washer dryer was delivered to you in pro Disposal of tective packaging. All utilised materials are ecological packaging ly harmless and recyclable. Please help by disposing of packaging in an environmentally friendly manner. Please ask your dealer or inquire at your local authori ty about current means of disposal.
Protection of the environment / Hints and tips Your washer dryer uses water, energy and detergent efficiently, thereby protecting the environment and reducing your household costs. See page 47 for con sumption values of your appliance. Using your washer dryer in an efficient and environ mentally friendly manner: - Use the maximum recommended capacities.
General safety instructions This washer dryer meets the relevant safety require ments. - Install the washer dryer in accordance with the Before starting installation instructions, page 48. operation - Remove and keep the transport protection devi ces. - Do not connect the washer dryer if it has visible damage.
- Remove all objects from pockets, especially ligh When washing and ters. drying please note - Do not leave children unsupervised with the ap pliance. - Keep pets away from the appliance. - Do not insert/pull out the mains plug with wet hands.
Your New washer dryer Filling laundry detergent and/or additive dispensers Dispenser 1: Detergent for prewash or pre soaking agent. Dispenser 2: Detergent for main wash Dispenser 2: Additives, e.g. fabric softener or starch. Service flap Open the door ... and close it. Downloaded From WashingMachine-Manual.com Manuals...
Control panel Display panel Option lights Indicates the settings which have been Delay timer, Time to end, selected (e.g. spin speed, time delay) Spin speed determine the display's content. as well as programme progress and Normal drying selected the programme state. Delicate dryingselected Start M button Door button...
Description of the washer dryer Your washer dryer allows the following programmes Operation and to be set: special features - wash only - dry only - wash+dry The complete wash+dry programme shifts automatically from the wash cycle to the dry cycle without further intervention.
Page 12
The acoustic signal indicates: The signal - pressing a button - the start of a programme - the end of a programme - operating errors and faults. q Press the Reduced Time I and Delay Timer W buttons simultaneously to activate or deactivate the signal.
Preparing and sorting the laundry Warning Preparing the Loose debris (e.g. coins, paper clips, needles, nails) washing can damage items of clothing as well as parts of the washer dryer (e.g. drum). q Empty all pockets on items of clothing. q Brush sand out of pockets and cuffs/turn ups.
Warning Sorting the laundry Washing may become discoloured. Do not wash new for washing coloured washing with other washing. According to colour and degree of dirt White items may become grey. Wash white and coloured items separately. Lightly soiled Degrees of dirt No visible soiling or stains.
Page 15
Very soiled Visible soiling and/or stains. - Kitchen towels used for up to one week. - Fabric serviettes. - Baby bibs. - Children's outer clothing or football jerseys and shorts soiled with grass and/or earth. - Work clothes, e.g. mechanic's overalls, baker's and butcher's clothing.
Page 16
Only wash laundry that is labelled with the following Sorting washing according to the instructions on the care symbols: care labels Cottons 90 °C c b a Coloureds 60 °C, 40 °C, 30 °C h g f Easy care 60 °C, 40 °C, 30 °C l g k f Hand washable and machine washable silk and wool, cold, 30 °C...
Warning Sorting the laundry Sort the laundry according to the care symbols on the for drying labels. Use to machine dry only laundry that is labelled "dry er safe", or that is identified by the following care sym bols = Dry at normal temperature = Dry at low temperature (Gentle drying) Do not dry the following garments in this washer...
Page 18
It is advisable to wash cottons / coloureds always in Energy conservation full machine loads (5 kg), subsequently making small er loads for drying. q Only use the drying facility for laundry which has Practical tips been washed, rinsed and spun. q Easy care laundry should have been spun at the relevant speed (see programme chart) before be ing tumble dried.
Detergents and cleaning products d Risk of poisoning! Dosing detergent Keep detergents and cleaning products out of the reach of children. Dose detergent according to q the water hardness. You can find out the water hardness from your water utility company. q the specifications of the detergent manufacturer.
Page 20
Dosing powder detergent Normal dirty washing q Choose a programme without prewash. q Pour the total quantity of detergent indicated on the packs into dispenser 2 of the detergent dra wer. Very dirty washing q Choose a programme with prewash. q Add ¼...
Filling detergent/ Dispenser 1 cleaning product Detergent for prewash. Dispenser 2 Detergent for main wash. Machine accessories include a red insert A that can be placed inside dispenser 2 to allow liquid detergent to be used. Dispenser 2 (3) Pour liquid additives such as starch and fabric softe ner.
First wash The washer dryer was tested before leaving the facto ry. To remove any residual test water, wash the first time without any laundry. q Check that the transport protection devices have been removed from the back of the washer dryer, page 50.
Programmes and functions The programmes are set using the programme selec Programme tor which can be turned in both directions. The pro selector gramme selector must not be set to intermediate positions between the indicated programmes. Cottons y 30, 40, 60, 90 °C Washing programmes Intensive washing programme for resistant cotton, coloured or hemp fabrics.
Page 24
Delicates 30 °C For delicate, washable textiles, e.g. silk, satin, synthetic materials or blended fabrics (e.g. curtains). Delicates cycle at 30 °C for hand and machine washable silk. i We do not recommend washing these textiles with other rougher textiles. Maximum load: 2.0 kg Reduced spin speed cold, 30 °C...
Page 25
Special programmes Freshen up/ Rinse+Spin For an additional rinse cycle turn the programme selector to Rinse+Spin K + V. Select the required spin speed. If the laundry is to be removed dripping wet, set the spin speed to 000 prior to starting this programme. For use fabric softener or starch fill the additives in dispenser 2 (3) before starting the programme.
Page 26
Soaking Only put items of the same colour into the drum. Put detergent for soaking in chamber 1. Follow the manufacturer's instructions on the package. i If the soaking suds are to be retained for the main wash programme, a detergent suitable for drum type washers must be used.
Page 27
Dyeing Your washer dryer offers only limited possibilities for dyeing. Please use only environmentally friendly dyeing agents. Follow the manufacturerer's instructions on application and suitability for washing machines. Therefore, after each dyeing, run a 90 °C wash pro gramme without laundry. Put a measuring cup of normal detergent in chamber 2.
Press this button to start the selected programme. Start M button The Start M LED is constantly on from the start of the programme until the end. Press the Start M button while the programme is Pausing the programme running, and keep it pressed until STOP appears in the display (approx.
Page 29
Press the Delay Timer W button repeatedly until the Changing the start time setting required time is displayed. Press the Delay Timer W button repeatedly until 0:00 Cancelling the start time appears in the display. The Delay Timer W LED goes out.
Press the button the required drying time, maximum Drying Y button 2:00 hours, is shown in the display. Press the button repeatedly to reduce the drying time. Press the Drying button for approx. 3 sec.. Reset Drying time The Normal drying LED lights. Intensive drying programme, for cotton and coloured garments.
Press this button to select the choice of the spin Spin B button speed. q Press the button repeatedly to select the required spin speed. The following spin speeds are available: Spin disabled and stop with tub full. The washer dryer 000 rpm: does not perform the final spin and ends the washing programme with water in the tub.
Washing and drying This washer dryer allows - wash only - dry only - wash+dry programmes to be set. In the wash+dry programmes, the cycle shifts auto matically from washing to drying without having to touch the controls to continue the cycle after washing. q Press the Door button to open the door.
q Set the programme selector to the required Wash only programme, e.g. Cottons y 60 ºC. This switches the washer dryer on. The display alternates between the remaining time and the spin speed setting. q Select the required spin speed, page 31. q Select additional functions for individual programmes, e.g.
i The tap must remain open during the drying cycle, Dry only as cold water is needed. i The maximum permitted load for drying is 2.5 kg. i For hand washed items select a separate spin cycle. The washer dryer is switched off. Setting a drying programme q Set the programme selector to Drying Y.
q Press the Start M button for approx. 3 seconds. Changing the drying programme The display alternates between STOP and ---. The Time to end LED flashes. q Press the Drying Y button repeatedly until the required drying time is set. q Press the Delicate Drying J button to set low heat if desired, page 30.
Page 36
Pausing the programme i The washing+drying can be paused at any time during the cycle. q Press the Start M button for approx. 3 sec. The display alternates between STOP and ---. The Start M LED flashes. Continuing the programme: Press the Start M button again.
End of programme The washing and drying programmes finish automatically. End appears in the display, and the Time to end LED lights up. q Turn the programme selector to Off m. q Remove the washing from the drum. q Leave the door open to allow the inside of the washer dryer to dry out.
Cleaning and servicing the washer dryer d Risk of electric shock! First, always disconnect the appliance from the power supply. Never clean the washer dryer with a water jet. d Risk of explosion! Never clean the washer dryer with solvents. Warning Never use sharp objects they will damage the surface! If required:...
q Put back the trap B. q Slide in the detergent drawer. Detergent has not been completely pumped away. Detergent pump The pump may be blocked by foreign bodies or lint. d Risk of scalding! Allow hot detergent to cool. Keep children and pets away from the washer dryer.
q Unscrew pump cover D in an anti clockwise direction. More water will flow out. q Remove detergent residues, foreign bodies and lint from the inside, and clean the interior. The pump impeller must be able to turn freely. q Remove detergent residues, foreign bodies and lint from the pump cover thread and pump housing.
Caution Descaling the Descaling agents contain acids which may corrode washer dryer the components of the washer dryer and discolour the washing. Provided that you use the correct amount of detergent, it is not necessary to descale the washer dryer. If descaling is nevertheless required, please follow the instructions supplied by the manufacturer of the descaling agent.
What to do if ... d Risk of electric shock! Repairs must only be carried out by customer services or authorised technicians. If repairs are needed, or if you cannot repair a fault yourself with the help of the following table: q Set the programme selector to Off m.
Page 43
Fault Possible cause Remedial action Door cannot be opened. Spin speed = 0 selected. Select programme Drain+Spin b + B and start. Programme is running and/or door is Wait until End appears in the locked for safety reasons. display. The Start M button has not been Press the Start M button.
Page 44
Fault Possible cause Remedial action Drain hose is twisted. Fit the drain hose correctly. Water does not drain. Water does not drain. Detergent pump is blocked. Clean the detergent pump, page 27. Reduce amount of detergent. Foam escapes from Foam escapes from Too much or incorrect detergent Too much or incorrect detergent detergent drawer.
Page 45
Fault Possible cause Remedial action Grey residues on the Soiling caused by ointment, grease Use maximum permissible detergent washing. or oil. amount and temperature for the next washing cycle; see the care label. Start M button pressed Programme terminated Press the button again to restart unexpectedly.
Customer service Before you call customer service, please check whe ther you can eliminate the fault yourself, from page 42 onwards. A technician who is called out to give advice will char ge you, even if the appliance is still under guarantee. You can find your nearest customer service in the enclosed address list.
Consumption data Washing Programme Weight of washing Result Coloureds 60 °C 5.0 kg Electricity: 1.1 kWh Water: 49 l Washing and drying Cotton 60 °C (coloureds) 5.0 kg Electricity: 4.25 kWh and cupboard dry 2 x 2.5 kg (for drying) Water: 95 l Automatic washing/drying process Boil wash 90 °C...
Installing, connecting and transporting the washer dryer Please install and connect the washer dryer in accordance with the enclosed installation and assembly instructions. Be sure to read the information contained in this chapter! d Risk of injury! Safety information The washer dryer is very heavy. Lift with caution. Frozen hoses may tear/burst.
On the back of the washer dryer: - Water drain hose. - Water inlet hose - Mains cable with plug. Built in appliance i See the separate Installation and assembly instructions. Supplied in addition to the stand alone appliance inside the drum: - a door template, - utilities for the built in installation.
d Risk of damage! Transport Before using the washer dryer for the first time, com protection devices pletely remove the transport protection devices on the rear. Store the transport protection devices for later trans port (moving house). q Loosen bolts with the 13 mm spanner until they are freely movable in the bushes.
Page 51
q Fix the supplied slide elements to the floor using double sided adhesive tape. On porous surfaces (e.g. screed) use an appropriate adhesive. q Position the washer dryer on the slide elements. q Moisten the slide elements with a mixture of water and washing up liquid before pushing the washer dryer into position.
Level the washer dryer using the four adjustable feet Levelling and a spirit level. All four feet must stand firmly on the ground. The washer dryer must not wobble. q Release lock nut 1 using the wrench. q Adjust the height by turning foot 2. Maximum recommended height adjustment 10 mm.
Hose and cable lengths Connection on left side approx. 110 cm approx. 130 cm approx. 180 cm Connection on right side approx. 100 cm approx. 100 cm approx. 130 cm Available in kit form from specialist outlets: Aquasecure extension hose - Connecting kit plastic hose (approx.
To prevent leaks or water damage, it is essential to Water connection follow the instructions in this chapter! Caution Operate the washer dryer with cold drinking water only. Do not connect the appliance to the mixer tap of an unpressurized hot water boiler. If in any doubt, have the water connection carried out by an authorized technician.
Page 55
Water drainage Caution Do not bend or pull the water drainage hose. Height difference between the placement area and drainage point: max. 90 cm, min. 50 cm. Drainage into a siphon: q Secure the connection point with a hose band clip of 24-40 mm diameter (from specialist stores).
Before you transport the washer dryer (e.g. when mo Transporting the ving house) washer dryer - Turn off the tap. - Reduce the water pressure in the water inlet hose, page 40. - Drain off any residual water, page 39. - Disconnect the machine from the power supply.
Page 57
Downloaded From WashingMachine-Manual.com Manuals...