Cisco WS-C3550-12G Software Configuration Manual page 575

Multilayer switch
Hide thumbs Also See for WS-C3550-12G:
Table of Contents

Advertisement

Chapter 22
Configuring IP Unicast Routing
This is an example of output from the show ip ospf database privileged EXEC command when no
arguments or keywords are used:
Switch# show ip ospf database
O OSPF Router with ID (172.20.135.202) (Process ID 1)
Link ID
172.20.135.202
This is an example of output of the show ip ospf interface privileged EXEC command when Gigabit
Ethernet 0/1 is specified:
Switch# show ip ospf interface gigabitethernet0/1
GigabitEthernet 0/1 is up, line protocol is up
Internet Address 131.119.254.202, Mask 255.255.255.0, Area 0.0.0.0
AS 201, Router ID 192.77.99.1, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State OTHER, Priority 1
Designated Router id 131.119.254.10, Interface address 131.119.254.10
Backup Designated router id 131.119.254.28, Interface addr 131.119.254.28
Timer intervals configured, Hello 10, Dead 60, Wait 40, Retransmit 5
Hello due in 0:00:05
Neighbor Count is 8, Adjacent neighbor count is 2
Adjacent with neighbor 131.119.254.28
Adjacent with neighbor 131.119.254.10
This is an example of output from the show ip ospf neighbor privileged EXEC command showing a
single line of summary information for each neighbor:
Switch# show ip ospf neighbor
ID
199.199.199.137 1
192.31.48.1
192.31.48.200
199.199.199.137 5
This is an example of output from the show ip ospf virtual-links privileged EXEC command:
Switch# show ip ospf virtual-links
Virtual Link to router 160.89.101.2 is up
Transit area 0.0.0.1, via interface Ethernet0, Cost of using 10
Transmit Delay is 1 sec, State POINT_TO_POINT
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 0:00:08
Adjacency State FULL
78-11194-03
Router Link States (Area 1)
ADV Router
Age
172.20.135.202
1065
Pri
State
Dead Time
FULL/DR
0:00:31
1
FULL/DROTHER
0:00:33
1
FULL/DROTHER
0:00:33
FULL/DR
0:00:33
Catalyst 3550 Multilayer Switch Software Configuration Guide
Seq#
Checksum Link count
0x8000002E 0x39E7
(Backup Designated Router)
(Designated Router)
Address
160.89.80.37
192.31.48.1
192.31.48.200
192.31.48.189
Configuring OSPF
1
Interface
Ethernet0
Fddi0
Fddi0
Fddi0
22-45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3550

Table of Contents