Post Error Codes - IBM 6648 - NetVista A40 - 128 MB RAM User Manual

POST error codes

Table 1. POST Error Codes
Code Description
101 Interrupt failure
102 Timer failure
106 System board failure
110 Parity error
111 I/O parity error 2
129 Level 1 cache error
135 Fan failure
151 Real time clock failure
161 Defective CMOS battery
162 A change in device configuration
occurred
163 Clock not updating
164 CMOS RAM memory size does not
match
166 Boot block check sum error
167 No processor patch
72
User Guide
Action
Have the computer serviced.
Have the computer serviced.
Have the computer serviced.
Have the computer serviced.
Go to "IBM Enhanced Diagnostics
program" on page 92 and follow the
instruction to run diagnostics.
Have the computer serviced.
Have the computer serviced.
Have the computer serviced.
Replace the battery. See "Replacing
the battery" on page 95.
1. Verify that all external devices
are turned on.
2. Verify that all devices are
properly installed and securely
connected.
3. If you added, removed, or
changed the location of a device,
save the new configuration in
the Configuration/Setup Utility
program. See "Starting the
Configuration/Setup Utility
program" on page 67 and
"Chapter 4. Using the
Configuration/Setup Utility
program" on page 29 for more
information.
Have the computer serviced.
Go to "IBM Enhanced Diagnostics
program" on page 92 and follow the
instructions to run diagnostics.
Have the computer serviced.
Update the BIOS. See "Updating
system programs" on page 20.