Rimage PrismPlus! User Manual page 19

Rimage PrismPlus! User Guide
5. Configure the Prism driver options.
a. Right-click on the Printer icon.
b. Select Properties. The Rimage Perfect Image Printer PF Properties window opens.
c. Select the Device Settings tab.
i. Select the type of installed ribbon. A monocolor ribbon is shipped with new Prism printers.

Note: The Double Print feature that is available with monocolor ribbons allows you to print the same label
twice on a disc. If you would like the printed areas on your discs to have more density, enable Double Print.
Using Double Print consumes more ribbon.
ii. Change the Master Print Strobe to achieve the best print results.
•
350 ms for monocolor
•
425 ms for color
d. Select the Advanced tab.
i. If the Prism is being used as a standalone printer or is attached to an AutoPrinter, select Spool print documents
so program finishes printing faster.
ii. Make sure the Enable advanced printing features box is clear.
e. Verify the USB port selection:
i. Select the Ports tab.

Note: The USB port selected is the port that the driver attempts to use. This verifies whether this port is the
correct port for the printer.
ii. On the Prism printer, press the operator button to open the printer tray.
iii. Place a disc on the printer tray.
iv. Press the operator button to close the printer tray.
v. Select the General tab.
vi. Select Print Test Page.
•
If the USB port selected is correct, a test image prints on the disc.
•
If the USB port is not correct, repeat steps i - vi, selecting a different USB port, until the test is successful.
-
Important! If you try multiple USB ports before the test prints successfully, make sure to delete the extra
jobs in the print queue.
vii. After a test image prints successfully, select OK.
The driver installation is complete.
16 110635_K