Plustek NVR 4200V User Manual page 46

4. Enter the "Name" for the device and the name will show at the screen banner
on "Live View", "Record View", "Motion Detection" page; enter the "Device
Name", "IP Address" and "WEB Port" of the IP Camera you've seen on the
"Device Information" page; enter the "User Name" and "Password" of the IP
Camera. Enter the password again in "Confirm Password".
5. Click "Next" to add the IP Camera information, and the "Connection Status"
window will show the status of the IP Camera you just added.
To change the IP Camera information
1. In the Device Management window, you may select the IP Camera by clicking
the radio button before its name.
2. You may click the "Edit" button to edit the Name of the IP Camera.
3. You may click the "Delete" button to delete the IP Camera.
4. You may click the "Restore" button to restore the IP Camera to its factory
default values.
5. You may click the "Restart" button to restart the IP Camera.
42