Plustek NVR 4200V User Manual page 15

9. When the NVR lists in the Network Device Search Tool window, your NVR
works properly.
NVR Slim240
To set up the NVR system in your LAN environment:
Please configure the IP address of the IP cameras before
connecting to the NVR.
Attention
1. Plug the RJ-45 connectors into LAN port of NVR and IP camera RJ-45 port.
2. Plug the RJ-45 connectors into WAN port and Router's LAN port.
3. Turn on the Router (Router with UPnP on/off function is recommended).
4. Plug the AC adapter into the DC-Jack of the NVR. Plug the other end of the
power cable into a standard AC power outlet.
5. Connect PC or Laptop with Router LAN port.
6. Insert the Installation CD, included with your NVR, into your CD-ROM drive.
7. Double click the "vcredist_x86.exe" file in your language on the CD-ROM to
install the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86).
8. Run the "Network Device Search Tool" application on the CD-ROM.
9. When the NVR lists in the Network Device Search Tool window, your NVR
works properly.
11