Plustek NVR 4200V User Manual page 20

13. When the NVR lists in the Network Device Search Tool window, your NVR
works properly.
NVR 4200V
To set up the NVR system in your LAN environment:
Please configure the IP address of the Video Server before
connecting to the NVR.
Attention
1. Connect the AC adapter to the DC IN Jack of the video server.
2. Plug the AC adapter into a standard wall outlet.
3. Connect the coaxial cable to the video input port of the Video Server from the
CCTV camera.
4. Connect CCTV power cord to an outlet, if any.
5. Put the cable clasp onto the RJ-45 cables. Put that end of the cable
connectors through the cable stabilizer rack. Clasp the cable clasp into the
cable stabilizer rack.
16