Table of Contents
Advertisement
TCP/IP
To choose the IP allocation methods:
1. Go to the "Advanced" page and click the menu "Network"
"TCP/IP".
2. Select either DHCP or static IP:
If the NVR adopts dynamic IP, check "Obtain IP via DHCP" radio button,
and your NVR will be assigned with any idle IP address in your
organization's network.
If the NVR uses static IP, check "Use the following IP" radio button, and fill
in the blanks of IP address, subnet mask and Gateway.
3. Enter the HTTP port if needed. The default port is 80.
To enter the DNS address if needed:
You may check "Obtain a DNS address automatically" radio button to obtain the DNS
address automatically. If you want the NVR to use a host name, you'll need to enter
at least one (Primary) DNS address.
1. Enter the IP address of the "Primary DNS Address" provided by your ISP.
2. Enter the IP address of the "Secondary DNS Address" provided by your ISP.
36
"WAN"
Advertisement
Table of Contents
