Plustek NVR 4200V User Manual page 21

6. Plug the RJ-45 connectors into LAN port of NVR and Ethernet Port of the
video server.
7. Plug the RJ-45 connectors into WAN port and Router's LAN port.
8. Fasten the rack screws to fix the cable stabilizer rack on the rear panel of the
NVR.
9. Turn on the Router (Router with UPnP on/off function is recommended).
10. Plug the power cord clasp into the hole above the DC-JACK.
11. Plug your suitable power source cable into the DC-Jack of the NVR. Put the
power cord into the power cord clasp.
17