Table of Contents
Advertisement
5. Turn on the Router (Router with UPnP on/off function is recommended).
6. Plug the power cord clasp into the hole above the DC-JACK.
7. Plug your suitable power source cable into the DC-Jack of the NVR. Put the
power cord into the power cord clasp.
8. Fasten the NVR screws to fix the NVR at the desired position.
9. Connect PC or Laptop with Router LAN port.
10. Insert the Installation CD, included with your NVR, into your CD-ROM drive.
11. Double click the "vcredist_x86.exe" file in your language on the CD-ROM to
install the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86).
12. Run the "Network Device Search Tool" application on the CD-ROM.
13. When the NVR lists in the Network Device Search Tool window, your NVR
works properly.
13
Advertisement
Table of Contents
