Olivetti d-Copia 15 Operation Manual page 30

CHAPTER 5 FUNCTIONS
2
Press the Zoom (+) or Zoom (-) key and change the number
to select the type of the borderline.
3
Press the enter key or layout key. The number of copies
appears on the display.
4
Press the layout key to light the 2 in 1 indicator or 4 in 1
indicator.
5-5
5
Set the original(s).
* Before setting originals on the platen, make sure they are in
the correct sequence.
6
Press the Start key.
* When originals are set in the DF, all originals are scanned
one by one and copying performed accordingly.
* When setting originals on the platen, "1" (number of
scanned originals) will be displayed after the first original is
scanned. Replace the original and press the Start key.
Repeat the same procedure for all the originals to be
copied.
7
When scanning of all the originals ends, press the enter key
or layout key. Copying will start.