Interrupt Copying - Olivetti d-Copia 15 Operation Manual

CHAPTER 4 BASIC OPERATIONS

3. Interrupt copying

Interrupt copying is useful if, during one copy job, other originals need
to be copied at different settings. The interrupted job can be resumed
at the same settings as before, after the rush job is finished.
1
Press the Interrupt key. When interrupt copying is enabled,
the Interrupt indicator lights.
2
Remove the present original(s) and put it aside.
3
Set the new original(s) and execute copying.
4-5
4
When copying ends, press the Interrupt key again and
replace the newly copied original(s) with the one(s) removed
before. Then, press the Start key. The interrupted copy job
will be resumed.