Olivetti d-Copia 2500 Operation Manual page 27

A
B
Preparation for Usage
IMPORTANT When using media types other than plain paper (such
as recycled or colored paper), always specify the media type setting.
(Refer to Specifying the Media Type for the Cassettes on page 2-8.)
The cassettes can hold 60 to 120 g/m² paper. When using 120 g/m²
paper, specify [Thick paper] for Specifying the Media Type for the
Cassettes on page 2-8. If the media type setting is wrong, paper jams
and deterioration of copy quality may occur.
1
Pull the cassette out toward you until it stops.
Note Do not pull out more than one cassette at a time.
2
Holding the paper width adjusting tab, move the paper width guides
to fit the paper.
Note Paper sizes are marked on the cassette.
3
Adjust the paper length guide to the length of the paper.
Note Paper sizes are indicated on the cassettes.
To change between inch size and metric size (A, B sizes),
follow the steps below to adjust the size switch.
1 Holding the paper width adjusting tab, move the paper
width guide to a position other than that of the paper.
2 Turn the size switch A 90°.
3 Move the size lever B up (C) or down (I).
C: metric size (centimeters) (A, B sizes)
I: inch size
4 Turn the size switch 90° to lock it.
>
>
2-3