Nautilus Commercial Series TreadClimber TC916 Assembly Manual page 34

asseMbly InsTRUcTIons
step6: c onnectingWiringharnesstoconsole
Locate the following for this step:
Parts:
• assembly from step 5
• Console (P/n 17670)
6-1 Connect the wiring harness from the handrail
upright support assembly (P/n - 17794) to Console
(P/n - 17670) on the left and right side. see figure 6.
noTe: if Tv Cable present, connect to mating cable
from the console.
6-2 being careful not to pinch the wiring harness, slide
the console into the open tubes of the handlebar.
imPorTanT!
harness cables Do not becoMe pincheD.

4
Make sure that the wiring
figure 6: Connecting Wiring harness to Console
Console
handrail assembly
base assembly
Wiring harness
Connection