Grundig Venti series Instruction Manual page 4

TV Stand Installation
The VENTI TVs come with a separated panel and base stand. Please see below detailed
instructions of how to connect your stand to your TV.
1. Place the TV with the display side down on a flat surface. Use a cloth or soft mat to
protect your TV during installation.
2. Attach the base stand at the neck as per the outline.
3. Fix the base stand with the screw (supplied).
G19LED, G22FLED, G22FLEDV, G24FLED & G24FLEDV
G26LCDV, G32LCD & G32LCDV
Wall Mount Bracket Installation
This TV is VESA Standard wall mountable. Please see below image of the 4 VESA standard holes
(G19LED, G22FLED, G22FLEDV, G24FLED and G24FLEDV ‐ 100mm x 100mm) (G26LCDV ‐ 200mm x
100mm, G32LCD and G32LCDV ‐ 400mm x 200mm). The wall mount bracket and screws are not
included with your TV. The wall bracket may be purchased from your local retailer. To attach your
bracket use the 4 holes provided to screw your bracket to your TV. You will also have to remove the
base stand and neck.
‐ 3 ‐