Grundig Venti series Instruction Manual page 18

Picture Mode
There are four different Picture modes: Standard, Mild, Dynamic and User. You are only able to set the
Contrast, Brightness, Colour or Sharpness in User mode. To change the Picture Mode, press the OK Button to
enter the submenu and then press the ▲ or ▼ Buttons to scroll through the picture modes. Press the OK
Button to confirm.
Contrast: Press the ◄ or ► Button to adjust the contrast.
Brightness: Press the ◄ or ► Button to adjust the brightness.
Colour: Press the ◄ or ► Button to adjust the colour.
Sharpness: Press the ◄ or ► Button to adjust the sharpness.
Tint: Press the ◄ or ► Button to adjust the tint, this option only works in VGA mode and when the VGA input
is connected.
Colour Temperature: Press the ◄ or ► Button to scroll through the colour temperature: Cold, Medium, user
and warm.
Aspect Ratio: There are three aspect ratios: 16:9, 4:3 and Auto.
Noise Reduction: Press the ▲ or ▼ Button to scroll through the Noise Reduction options. You can set Noise
Reduction to Off, Low, Middle, High, and Auto.
Screen: This option is for PC Mode only. Please refer to the PC section of the manual.
Sound Menu
To enter the Sound Menu, press the MENU Button, then press the ◄ or ► Button to select the Sound Menu
and press the OK Button to enter.
Once in the Sound Menu, press the ▲ or ▼ Button to select the options you wish to adjust. Press the OK
Button to enter the sub‐Menu. To return to the Main Menu, press the MENU Button, or press the EXIT Button
to exit.
‐ 17 ‐