Basic Operations - Grundig Venti series Instruction Manual

or Camcorder (cables not supplied).
5. AV Output allows you connect your TV with another monitor or TV sets when it is in DVD or TV mode.
6. VGA Input can be connected with the VGA Output of your PC to use this TV as a monitor. There is also a PC
Audio Input for your connection with PC, see image below.
7. Connect your TV to your Mains Power (AC 100‐240 Volts, 50/60). Please only connect this TV to Mains Power
that matches the power specifications (AC 100‐240 Volts, 50‐60 Hz) of this TV.
8. For the LCD Models only, press the main power switch on the back of unit to turn on your TV to Standby
mode. You then must press the Standby Button on remote control to turn on your TV.
Please note:
After AV, YPBPR or HDMI is selected ensure the Video Output from your connected accessory (for
example DVD player) is set to corresponding video mode.
AV and YPbPr share the same Right/Left Audio Input.
Basic Operations
1) Press the STANDBY Button on the unit or remote control to turn the TV on or off.
Please note: For the LCD models, you are required to press the main power switch on the back of unit
before pressing the Standby Button on your remote control.
2) If you are using the TV for the first time, the Installation Guide below will be displayed to guide you
through the initial channel scan. Press the Navigation Buttons to the prompted options i.e. language or
Country. Then press the OK Button to confirm. When you have selected the options in the Installation
Guide, DTV Auto Tuning will then start automatically. You may press the Menu Button to skip ATV for
DTV tuning.
‐ 12 ‐