3) After auto tuning, the amount of programs found and stored will be shown on the display and the first
channel will begin to play automatically.
4) To change between Digital TV (DTV) and Analog TV (ATV), press the SOURCE Button on the remote
control to select the preferred mode.
5) To change the channel in either mode, press the CH+/CH‐ Button or press the OK Button in TV mode to
display the Channel List. Then press the UP/DOWN Navigation Buttons to select the channel you want to
watch and press the OK Button to confirm the highlighted channel. You can also press Numeric Buttons
on remote to select the channel directly. To go back to the last channel you were watching you can press
the RECALL Button on the remote control.
6) To change the source input to watch a connected accessory, press the SOURCE Button and then press
the ▲or ▼ Navigation Buttons to scroll through and select the available input source.
7) To adjust the volume, press the VOL+/‐ Button to increase or decrease the sound level.
8) Press the MUTE Button to turn off the sound only and press it again to turn on the sound again.
9) Press the INFO Button to display the information of the channel playing. Press the Up or Down arrows to
scroll up through the information. Press the Right arrow to display the information of the next channel,
and press the Left arrow to return to the information of the current channel.
Teletext
Teletext is an information system broadcasted by certain channels which will provide detailed program
information. It also offers access to subtitles for viewers with hearing problems or who are not familiar with
the transmission language (cable networks, satellite channels, etc.) To view the TV Teletext Menu you must
be watching or in DTV mode. Below are the basic operation regarding to Teletext.
1. Press the TEXT Button to enter the Teletext Menu. Press again to exit.
2. Press the CH+/‐ or Numeric Buttons to select the page you wish to view. Note: When using the
Numeric Buttons the first number should not be '0' or '9'.
3. Press the INDEX Button will open/return you to the contents page.
4. Press the SKIP BACKWARDS
HOLD Button to freeze the page.
/
‐ 13 ‐