Setting The Stitch Length; Setting The Thread Tension; Proper Thread Tension - Baby Lock Ellisimo BLSO Instruction And Reference Manual

Setting the Stitch Length

Follow the steps below when you want to change
the stitch pattern length.
Example:
Press to shorten the stitch length.
o The value in the display gets smaller.
Press to lengthen the stitch length.
o The value in the display gets bigger.
Memo
• Press to check changes made to the
stitch.
• Press to return the stitch length to
the original setting.
CAUTION
• If the stitches get bunched together, lengthen
the stitch length and continue sewing. Do not
continue sewing without lengthening the stitch
length. Otherwise, the needle may break and
cause injury.

Setting the Thread Tension

You may need to change the thread tension,
depending on the fabric and thread being used.
Follow the steps below to make any necessary
changes.

■ Proper Thread Tension

The upper thread and the bobbin thread should
cross near the center of the fabric. Only the upper
thread should be visible from the right side of the
fabric, and only the bobbin thread should be visible
from the wrong side of the fabric.
a Wrong side
b Surface
c Upper thread
d Bobbin thread
STITCH SETTINGS
2
67