Care And Maintenance; Cleaning The Lcd Screen; Cleaning The Machine Casing; Cleaning The Race - Baby Lock Ellisimo BLSO Instruction And Reference Manual

CARE AND MAINTENANCE

CARE AND MAINTENANCE

• Be sure to unplug the machine before cleaning it. Otherwise, electric shock or injury may result.

Cleaning the LCD Screen

If the screen is dirty, gently wipe it with the
included LCD cleaning cloth or a soft, dry cloth.
Do not use organic solvents or detergents.
Note
• Do not wipe the LCD screen with a damp
cloth.
Memo
• Occasionally, condensation may form on the
LCD screen or it may become fogged up;
however, this is not a malfunction. After a
while, the cloudiness will disappear.

Cleaning the Machine Casing

If the surface of the machine is dirty, lightly soak a
cloth in a neutral detergent, squeeze it out firmly,
and then wipe the surface. Then wipe again with a
dry cloth.

Cleaning the Race

If dust or bits of dirt collect in the race or bobbin
case, the machine will not run well, and the
bobbin thread detection function may not operate.
Keep the machine clean for best results.
→
Press
→
video example of cleaning the race (see page 34).
Follow the steps explained below to complete the
operation.
312
→ →
in this order to display a
CAUTION
a
Press the "Needle Position" button to raise
the needle.
b
Turn the main power to OFF.
c
Remove the needle and the presser foot
holder (see pages 55 through 56).
d
Remove the flat bed attachment or the
embroidery unit if either is attached.
e
Grasp both sides of the needle plate cover,
and then slide it toward you.
a Needle plate cover
→ The needle plate cover is removed.
f
Grasp the bobbin case, and then pull it out.
a Bobbin case