Cleaning The Cutter In The Bobbin Case Area - Baby Lock Ellisimo BLSO Instruction And Reference Manual

CARE AND MAINTENANCE
a
Follow steps
Race" to remove the bobbin case.
b
Using a piece of paper of adequate
thickness and sturdiness, slide the paper
between the tension plate base and the
tension spring and also slide the paper
behind the notch of the spring to remove
any dirt or dust.
a Tension plate base
b Notch
c Paper (e.g. business card type)
d Tension spring
Memo
• Do not bend the tension spring. In addition,
do not use anything other than recom-
mended paper to clean the bobbin case.
c
Use the cleaning brush to remove any lint
and dust from inside the bobbin case.
d
Replace the bobbin case and needle plate
cover.
314
a f
to in "Cleaning the
Cleaning the Cutter in the Bobbin
Case Area
The cutter below the needle plate should be
cleaned. If dust or lint accumulate on the cutter, it
will be difficult to cut the thread when the "Thread
Cutter" button is pressed or the automatic thread
cutting function is used. Clean the cutter when the
thread is not easily cut.
a
a
Follow steps through
Race" to remove the needle plate cover.
b
Use the screwdriver included with the
machine to unscrew and remove the needle
plate.
c
Use the cleaning brush or a vacuum cleaner
to remove any lint and dust from the cutter
in the bobbin case area.
a Cutter
CAUTION
• Do not touch the cutter, otherwise injuries
may result.
e
in "Cleaning the