Table of Contents
Advertisement
36
Load Best Performance Settings
If you select this item and press Enter a dialog box appears. If you select [OK], and
then Enter, the Setup Utility loads a set of best-performance default values. These
default are quite demanding and your system might not function properly if you are
using slower memory chips or other low-performance components.
Warning: To load Best Performance Settings may make your system unstable
or unbootable.
Load Optimal Defaults
This option opens a dialog box that lets you install optimized defaults for all appropriate
items in the Setup Utility. Press <OK> and then <Enter> to install the defaults. Press
<Canel> and then <Enter> to not install the defaults. The optimized defaults place
demands on the system that may be greater than the performance level of the components,
such as the CPU and the memory. You can cause fatal errors or instability if you install
the optimized defaults when your hardware does not support them. If you only want to
install setup defaults for a specific option, select and display that option, and then press
<F9>.
Users please remain the factory BIOS default setting of "Load Optimized
Defaults" when install Operation System onto your system.
Save Changes and Exit
Highlight this item and press <Enter> to save the changes that you have made in the Setup
Utility and exit the Setup Utility. When the Save and Exit dialog box appears, select [OK]
to save and exit, or select [Cancel] to return to the main menu.
Discard Changes and Exit
Highlight this item and press <Enter> to discard any changes that you have made in the
Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog box appears,
select [OK] to discard changes and exit, or select [Cancel] to return to the main menu.
If you have made settings that you do not want to save, use the "Discard
Changes and Exit" item and select [OK] to discard any changes you have
made.
Using BIOS
Hide quick links:
Advertisement
Table of Contents
