Feature - ECS 915PL-A2 User Manual

2

Feature

Processor
The 915PL-A2 uses an LGA775 type of Pentium 4 that carries the following features:
• Accommodates Intel P4/Celeron processors
• Supports a system bus (FSB) of 800/533MHz
• Supports "Hyper-Threading" technology CPU
"Hyper-Threading" technology enables the operating system into thinking it's hooked
up to two processors, allowing two threads to be run in parallel, both on separate
"logical" processors within the same physical processor.
Chipset
The 915PL Northbridge (NB) and ICH6 Southbridge (SB) chipsets are based on an
innovative and scalable architecture with proven reliability and performance.
915PL (NB)
915PL chipset can only support 256-Mb, 512-Mb and 1-Gb DDR technologies
for x8 and x16 device, NOT support 128-Mb DDR technology. That is, 256 MB
Double Side Memory Module & 128 MB Single Side Memory Module are NOT
support.
ICH6 (SB)
Memory
• Supports DDR 400/333 MHz DDR SDRAM DIMMs
• Accommodates two unbuffered DIMMs
• Up to 1 GB per DIMM with maximum memory size up to 2 GB
• Supports 32-bit host bus addressing, allowing the CPU to
access the entire 4 GB of the memory address space.
• Has a 12-deep In-Order Queue to support up to twelve
outstanding piplined address requests on the host bus.
• Supports one PCI Express x16 for Graphics Interface, fully
compliant to the PCI Express base Sepcification revision
1.0a
• Supports 256-Mb, 512-Mb and 1-Gb DDR technologies for
x8 and x16 devices
• Enhanced DMA Controller, interrupt controller, and timer func-
tions
• Compliant with PCI Express Base Specification, Revision
1.0a
• Compliant with PCI 2.3 specificaiton
• Compliant with Serial ATA 1.0a specification
• Integrated USB 2.0 Host Controller supporting up to eight
USB 2.0 ports
• Integrated LAN controller
• Compliant with Azalia specification supporting 8 channels
of audio outputs
• Integrated IDE controller supports Ultra ATA100/66/33
Introducing the Motherboard