Power Management Setup - ECS 915PL-A2 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Ethernet Device (Enabled)

Use this item to enable or disable the onboard Ethernet.

Audio Device (Enabled)

Use this item to enable or disalbe the onboard audio device.

Onboard USB Function (Enabled)

Enable this item if you plan to use the USB ports on this motherboard.

USB Function For DOS (Disabled)

Enable this item if you plan to use the USB ports on this motherboard in a DOS environ-

ment.

Press <Esc> to return to the main menu setting page.

Power Mangement Setup

This page sets up some parameters for system power management operation.

ACPI Aware O/S

Power Management

ACPI Enhanced Efficiency

Suspend Time Out

LAN/Ring Power On

Resume on RTC Alarm

Keyborad Power On

Password

: Move

+/-/: Value Enter : Select

F8:Best Performance Settings

ACPI Aware O/S (Yes)

This itme supports ACPI (Advanced Configuraion and Power Management Interface). Use

this item to enable or disable the ACPI feature.

Power Management (Enabled)

Use this item to enable or disable a power management scheme. If you enable power

management, you can use this item below to set the power management operation. Both

APM and ACPI are supported.

ACPI Enhanced Efficiency (Disabled)

This item allows you to enable or disable ACPI Enhanced Efficiency function.

Suspend Time Out (Disabled)

This item sets up the timeout for Suspend mode in minutes. If the time selected passes

without any system activity, the computer will enter power-saving Suspend mode.

LAN/Ring Power On (Disabled)

The system can be turned off with a software command. If you enable this item, the system

can automatically resume if there is an incoming call on the Modem/Ring, or traffic on the

network adapter. You must use an ATX power supply in order to use this feature.