Honeywell Tradeline T8611M Installation Instructions Manual page 8

DELUXE PROGRAMMABLE HEAT PUMP THERMOSTAT
Refer to Table 5 for descriptions of specific system tests.
NOTE: Press Time
Program to exit the system test.
Key to Test
Press Number
Heating Equipment System-Test
Time 10
11
12
13
12
11
10
Emergency Heating Equipment System-Test
Time 20
21
22
21
20
Cooling Equipment System-Test
Time 30
31
32
31
30
Fan Equipment System-Test
Time 40
41
40
Key Operation System-Test
Time 60
NOTE: Press any key and the displayed numbers change. Press Time
to go to the next test. The Run Program Key will not exit this test. To exit, press Time
the Run Program key.
69-1415
to advance to the next test and press Time
Table 5. Installer System-Test Options.
Enter heating equipment system-test.
Stage-one heat comes on. The system fan is also energized.
Stage-two heat comes on. Stage-one heat and system fan remain on.
Stage-three heat comes on. Stage one and two remain on.
Stage-three hat turns off.
Stage-two heat turns off.
Stage-one heat and system fan turn off.
Change from heating to emergency heating equipment system-test.
Emergency heat comes on.
Stage-two emergency heat comes on.
Stage-two emergency heat turns off.
Emergency heat turns off.
Change from heating or emergency heating to cooling equipment system-test.
Cool and system fan come on.
Stage-two cooling comes on.
Stage-two cooling turns off.
Cool and system fan turn off.
Change from cooling to fan equipment system-test.
Fan comes on.
Fan turns off.
Change from fan to key operation system-test.
to go back to the previous test. Press Run
Description
to go to the previous test and the Time
8
or Time and then