Led Indication; Temperature Settings - Honeywell Tradeline T8611M Installation Instructions Manual

DELUXE PROGRAMMABLE HEAT PUMP THERMOSTAT
SET WAKE TIMES
AND SETPOINTS
INCREASE TIME SETTING
OR SCROLL FORWARD
THROUGH INSTALLER SETUP
AND SYSTEM TEST
SET CURRENT
DAY AND TIME
RETURN TO
NORMAL
OPERATIONS
ENTER
INDEFINITE
OR TIMED
HOLD MODE
SET CURRENT OR
PROGRAM DAY
CHANGE BETWEEN
DAYLIGHT SAVINGS
AND STANDARD TIME
COPY ONE PROGRAMMED
DAY TO ANOTHER DAY

LED Indication

Two LED indicators are located on the upper right top of
the thermostat. They indicate when a CHECK or FAIL
signal is sent to the thermostat from the system. See
Fig. 9. The CHECK LED is on continuously when the
thermostat system setting is in the Emergency Heat
position.

Temperature Settings

Refer to Table 2 for the default program settings. If the
daytime energy savings period is not used, press the
period key (Leave or Return) until the time is blank. The
fan setting feature is available on select thermostat
models. See the Owners Guide for complete instructions
on changing the program.
Time
Run
Set Current
Wake
Program Day/Time
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
Fig. 8. T8611M System and Fan key locations.
69-1415
Time
Set Current
Run
Program Day/Time
Hold Temp
Day
Daylight
Copy
Time
Fig. 7. T8611M key locations and descriptions.
Set Program
Leave Return Sleep
System Fan
M14625
SET LEAVE TIMES
AND SETPOINTS
SET RETURN TIMES
AND SETPOINTS
Set Program
Leave
Wake Return
Heat/Cool
System
Settings
CHANGE BETWEEN
HEATING AND COOLING
SETPOINTS
DECREASE TIME SETTING
OR SCROLL BACKWARD
THROUGH INSTALLER
SETUP AND SYSTEM TEST
TWO LED
INDICATORS
1
Table 2. Default Program Settings.
Period
Wake 6:00 AM
Leave 8:00 AM
System
Return 6:00 PM
Fan
Sleep 10:00 PM
4
INCREASE TEMPERATURE
SETTING OR SCROLL
FORWARD THROUGH
INSTALLER SETUP OPTIONS
DECREASE TEMPERATURE
SETTING OR SCROLL
BACKWARD THROUGH
INSTALLER SETUP OPTIONS
DISPLAY INFORMATION
SUCH AS PRESENT
SETTINGS AND OUTDOOR
TEMPERATURE
SET SLEEP
TIMES AND
SETPOINTS
Sleep
SELECT FAN
OPERATION
Fan
SELECT SYSTEM
OPERATION
TWO LED INDICATORS ON MOST MODELS.
Fig. 9. LED location.
Heat
Time Setpoint
70 F
(21 C)
62 F
(16.5 C)
70 F
(21 C)
62 F
(16.5 C)
M4624
1
M10675A
Cool Fan
Setpoint Setting
78 F Auto
(25.5 C)
85 F Auto
(29.5 C)
78 F Auto
(25.5 C)
82 F Auto
(28 C)